Sig P226
-
10,00 €The genuine SIG SAUER OEM factory decocking lever spring is a critical component engineered to maintain the crisp, positive return of your pistol’s decocking lever. This spring ensures that the lever automatically snaps back up into its ready position after safely lowering the cocked hammer. Over time, high-volume use or […]
-
10,00 €The genuine SIG SAUER OEM factory extractor spring is a vital internal component designed to provide optimal, consistent tension to the extractor claw. It ensures that the extractor firmly grips the cartridge rim throughout the entire cycling process for clean, positive ejection. Over time and heavy high-volume use, spring fatigue […]
-
10,00 €The genuine SIG SAUER OEM factory magazine catch stop is a small but critical internal frame component designed to securely lock the magazine release button and its spring inside the pistol frame. Stamped from high-grade steel to precise factory tolerances, this original replacement part ensures that your magazine release mechanism […]
-
10,00 €The genuine SIG SAUER OEM factory mainspring (hammer spring) is a vital ignition component responsible for driving the hammer forward with the necessary velocity and force to strike the firing pin. Over time and extensive use, a fatigued mainspring can lead to light primer strikes and failures to fire. Stamped […]
-
10,00 €The genuine SIG SAUER OEM factory hammer pin is a precision-engineered frame component that serves as the rotational axis for the pistol’s hammer. This critical pin ensures that the hammer remains perfectly aligned inside the frame, minimizing side-to-side play and delivering a smooth, consistent trigger break and reset. Stamped from […]
-
10,00 €The genuine SIG SAUER OEM factory slide catch lever spring is a critical internal component designed to maintain the proper downward tension on the slide catch lever. This spring ensures the lever stays down during live fire, preventing premature slide lock when rounds are still present in the magazine. A […]
-
10,00 €The genuine SIG SAUER OEM factory sear pin is a precision-machined frame component that serves as the critical axis for the sear and the sear spring. This pin ensures that the fire control components remain perfectly aligned inside the frame, eliminating unwanted play and delivering a crisp, consistent trigger pull […]
-
15,00 €The genuine SIG SAUER OEM factory contrast front sight is the standard-issue iron sight designed for crisp alignment and fast target acquisition. This steel front post features a bright, high-contrast white dot embossed onto the blade, helping the sight stand out sharply against dark targets and backgrounds in daylight conditions. […]
-
15,00 €This professional plain black front sight is engineered for shooters who demand an uncluttered, high-precision sight picture. By eliminating dots or fiber optics, it prevents any glare or visual distraction in bright daylight, allowing for a perfectly defined reference point. The front blade features fine horizontal serrations that effectively suppress […]
-
15,00 €Fits classic SIG SAUER P-Series pistols (P220, P225, P226, P228, P229) as well as modern P320 and P365 series utilizing standard factory dovetail cuts. Note: Ships in factory standard heights (most commonly #8) to retain original combat point of impact settings. The genuine SIG SAUER OEM factory Bar-Dot rear sight […]
-
15,00 €The genuine SIG SAUER OEM factory mainspring seat is a critical frame component housed at the lower rear section of the grip, designed to support and capture the base of the mainspring (hammer spring). It provides a rigid, secure platform that withstands continuous spring tension during the hammer’s cycling process. […]
-
15,00 €The genuine SIG SAUER OEM factory trigger bar spring is a critical fire-control component engineered to provide constant upward tension on the trigger bar. This ensures the trigger bar remains properly aligned and reliably engages the sear to cycle the action. A fatigued, bent, or broken spring will cause total […]
-
15,00 €The genuine SIG SAUER OEM factory mainspring seat is a critical frame component housed at the lower rear section of the grip, designed to support and capture the base of the mainspring (hammer spring). It provides a rigid, secure platform that withstands continuous spring tension during the hammer’s cycling process. […]
-
15,00 €The classic “old style” trigger bar spring (characterized by its smooth, arched design without a center coil loop) is specifically engineered for vintage German and West German (W. Germany) SIG SAUER production pistols from the 1980s and early 1990s. This original arched configuration is a critical component for historical restorations: […]
-
25,00 €The genuine SIG SAUER OEM factory sear spring is a critical safety and fire-control component engineered to apply consistent, precise tension to the sear. This spring ensures the sear remains firmly engaged with the hammer hooks until the trigger is intentionally pulled. A fatigued, bent, or broken sear spring poses […]
-
25,00 €The genuine SIG SAUER OEM factory safety lever is a critical fire-control plate that sits directly alongside the sear assembly in the frame. Upon pulling the trigger, this lever transfers upward movement to disengage the firing pin block safety inside the slide, clearing the path for the firing pin to […]
-
25,00 €The genuine SIG SAUER OEM factory recoil spring guide rod is a critical internal component designed to support and ensure the strictly linear compression of the recoil spring during the cycling process. It prevents the spring from binding, kinking, or shifting under tension, which guarantees smooth slide tracking and positive […]
-
30,00 €The genuine SIG SAUER OEM factory curved trigger is a direct replacement part designed to restore your firearm to its original, out-of-the-box configuration. The classic curved profile automatically centers the shooter’s finger on the trigger shoe, delivering a traditional, uniform, and predictable trigger pull that duty-grade operators rely on. It […]
-
30,00 €This factory-spec short external extractor is engineered specifically for early legacy production SIG SAUER P226 and P229 configurations. Often referred to as the “legacy” or “old style” extractor, it is uniquely held in place by a small vertical roll pin within the slide cutout rather than snapping into the slide […]
-
35,00 €The genuine SIG SAUER OEM factory standard magazine release button is a direct replacement part designed to restore your firearm to its original, out-of-the-box configuration. The low-profile geometry and precise factory retention completely eliminate the risk of accidental magazine drops caused by holster contact or clothing snags [1]. The button […]