P226 X-Five
-
10,00 €The genuine SIG SAUER OEM factory decocking lever spring is a critical component engineered to maintain the crisp, positive return of your pistol’s decocking lever. This spring ensures that the lever automatically snaps back up into its ready position after safely lowering the cocked hammer. Over time, high-volume use or […]
-
10,00 €The genuine SIG SAUER OEM factory extractor spring is a vital internal component designed to provide optimal, consistent tension to the extractor claw. It ensures that the extractor firmly grips the cartridge rim throughout the entire cycling process for clean, positive ejection. Over time and heavy high-volume use, spring fatigue […]
-
10,00 €The genuine SIG SAUER OEM factory magazine catch stop is a small but critical internal frame component designed to securely lock the magazine release button and its spring inside the pistol frame. Stamped from high-grade steel to precise factory tolerances, this original replacement part ensures that your magazine release mechanism […]
-
10,00 €The genuine SIG SAUER OEM factory mainspring (hammer spring) is a vital ignition component responsible for driving the hammer forward with the necessary velocity and force to strike the firing pin. Over time and extensive use, a fatigued mainspring can lead to light primer strikes and failures to fire. Stamped […]
-
10,00 €The genuine SIG SAUER OEM factory hammer pin is a precision-engineered frame component that serves as the rotational axis for the pistol’s hammer. This critical pin ensures that the hammer remains perfectly aligned inside the frame, minimizing side-to-side play and delivering a smooth, consistent trigger break and reset. Stamped from […]
-
10,00 €The genuine SIG SAUER OEM factory slide catch lever spring is a critical internal component designed to maintain the proper downward tension on the slide catch lever. This spring ensures the lever stays down during live fire, preventing premature slide lock when rounds are still present in the magazine. A […]
-
10,00 €The genuine SIG SAUER OEM factory sear pin is a precision-machined frame component that serves as the critical axis for the sear and the sear spring. This pin ensures that the fire control components remain perfectly aligned inside the frame, eliminating unwanted play and delivering a crisp, consistent trigger pull […]
-
15,00 €The genuine SIG SAUER OEM factory contrast front sight is the standard-issue iron sight designed for crisp alignment and fast target acquisition. This steel front post features a bright, high-contrast white dot embossed onto the blade, helping the sight stand out sharply against dark targets and backgrounds in daylight conditions. […]
-
15,00 €This professional plain black front sight is engineered for shooters who demand an uncluttered, high-precision sight picture. By eliminating dots or fiber optics, it prevents any glare or visual distraction in bright daylight, allowing for a perfectly defined reference point. The front blade features fine horizontal serrations that effectively suppress […]
-
15,00 €The genuine SIG SAUER OEM factory spring is a critical ignition component engineered to maintain your pistol’s textbook operational reliability and drop safety. For classic hammer-fired P-series pistols, this spring provides the necessary tension to return the firing pin to its rest position after every strike, preventing primer drag or […]
-
15,00 €The genuine SIG SAUER OEM factory mainspring seat is a critical frame component housed at the lower rear section of the grip, designed to support and capture the base of the mainspring (hammer spring). It provides a rigid, secure platform that withstands continuous spring tension during the hammer’s cycling process. […]
-
15,00 €The genuine SIG SAUER OEM factory trigger bar spring is a critical fire-control component engineered to provide constant upward tension on the trigger bar. This ensures the trigger bar remains properly aligned and reliably engages the sear to cycle the action. A fatigued, bent, or broken spring will cause total […]
-
15,00 €The genuine SIG SAUER OEM factory mainspring seat is a critical frame component housed at the lower rear section of the grip, designed to support and capture the base of the mainspring (hammer spring). It provides a rigid, secure platform that withstands continuous spring tension during the hammer’s cycling process. […]
-
25,00 €The genuine SIG SAUER OEM factory sear spring is a critical safety and fire-control component engineered to apply consistent, precise tension to the sear. This spring ensures the sear remains firmly engaged with the hammer hooks until the trigger is intentionally pulled. A fatigued, bent, or broken sear spring poses […]
-
25,00 €The genuine SIG SAUER OEM factory safety lever is a critical fire-control plate that sits directly alongside the sear assembly in the frame. Upon pulling the trigger, this lever transfers upward movement to disengage the firing pin block safety inside the slide, clearing the path for the firing pin to […]
-
25,00 €The genuine SIG SAUER OEM factory firing pin retaining pin (also known as the Firing Pin Positioning Pin or FPPP) is a critical cross-pin designed to securely capture and lock the firing pin and its return spring inside the slide channel. On high-performance match platforms like the P226 X-Five, this […]
-
35,00 €The genuine SIG SAUER OEM factory standard magazine release button is a direct replacement part designed to restore your firearm to its original, out-of-the-box configuration. The low-profile geometry and precise factory retention completely eliminate the risk of accidental magazine drops caused by holster contact or clothing snags [1]. The button […]
-
Out of Stock
45,00 €This premium red fiber-optic front sight is engineered to drastically decrease target acquisition time and boost shot-to-shot consistency during daytime sessions and action-shooting matches. The integrated light-gathering polymer rod funnels ambient light directly toward the shooter’s eye, projecting an ultra-bright, glowing red dot that demands focus. It is the absolute […]
-
60,00 €The extended magazine release button is an essential ergonomic upgrade engineered to facilitate lightning-fast magazine changes and optimize firearm manipulation. Featuring an elevated profile and an enlarged surface area, it provides significantly better mechanical leverage and closer thumb accessibility. Operators no longer need to shift or break their master firing […]
-
110,00 €This premium internal extractor claw is engineered specifically to meet the strict performance tolerances of high-tier SIG SAUER P226 X-Series match handguns. Under the rigorous high-volume cycling of competitive action shooting (IPSC/IDPA), maintaining consistent, positive extractor tension is paramount to preventing stovepipes and extraction failures. CNC-machined from heavy-duty hardened tool […]